Je ne peux ' définir une passerelle de dernier recours

Je ne parviens pas à définir une passerelle de dernier recours sur un routeur. Je veux quil transmette tout ce dont ladresse IP ne figure pas dans la table de routage au QG du routeur via linterface s0 / 0/0 en procédant comme suit:

Branch1#config t Branch1(config)#ip route 0.0.0.0 0.0.0.0 s0/0/0 

Quand je vérifie la table de routage, elle napparaît pas là …

Branch1#sh ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 192.168.7.0/24 is variably subnetted, 8 subnets, 4 masks C 192.168.7.64/27 is directly connected, GigabitEthernet0/0.107 L 192.168.7.94/32 is directly connected, GigabitEthernet0/0.107 C 192.168.7.144/28 is directly connected, GigabitEthernet0/0.37 L 192.168.7.158/32 is directly connected, GigabitEthernet0/0.37 C 192.168.7.160/28 is directly connected, GigabitEthernet0/0.157 L 192.168.7.174/32 is directly connected, GigabitEthernet0/0.157 C 192.168.7.244/30 is directly connected, Serial0/0/1 L 192.168.7.245/32 is directly connected, Serial0/0/1 

Bien quelle apparaisse dans le courant- config as

 ip classless ip route 0.0.0.0 0.0.0.0 Serial0/0/0 

Le brief de linterface IP:

 Branch1#sh ip interface br Interface IP-Address OK? Method Status Protocol GigabitEthernet0/0 unassigned YES unset up up GigabitEthernet0/0.37 192.168.7.158 YES manual up up GigabitEthernet0/0.107 192.168.7.94 YES manual up up GigabitEthernet0/0.157 192.168.7.174 YES manual up up GigabitEthernet0/1 unassigned YES unset administratively down down Serial0/0/0 unassigned YES unset up up Serial0/0/1 192.168.7.245 YES manual up up Serial0/1/0 unassigned YES unset administratively down down Serial0/1/1 unassigned YES unset administratively down down Vlan1 unassigned YES unset administratively down down 

Commentaires

• Veuillez utiliser loption Preformatted-text ({}) sur vos configurations, et non loption Quoted-test ("").