Hvordan blinke tilpasset eller lager ROM med Odin-modus som fungerer? (fra en dårlig blinket Galaxy A20, se bildet)

Blinkende riktig img løste problemet:

heimdall flash --RECOVERY TWRP-3.3.1.0_A20_V1.2_by_Agrim720\[Black-themed\].img.img 

Fil ble funnet her: XDA-forum

Enhet: A205GUBU4ASK2

Tidligere forankret med boot.img lappet av magisk og vbmeta blinket:

heimdall flash --BOOT magisk_patched.img heimdall flash --VBMETA vbmeta.img 

Jeg anbefaler på det sterkeste å unngå Samsung-enheter. Motorola-ene, f.eks. er bedre for tilpassede ROM-er.

Hvis enheten klager over «offisielle binærfiler», trengs omgå KG-tilstand .

Kommentarer

• TWRP fungerte imidlertid bare første gang. Etter at jeg hadde formatert Data og startet på nytt, startet enheten med puritanisme om " offisielle binærfiler ".
• Jeg trengte å omgå KG-staten. svaret oppdatert. takk.

For Heimdal:

Jeg refererer til Utviklere leser meg fil for Linux kommandolinjeinstruksjoner:

Blinkende fastvare fra kommandolinjen:

1. Fully charge your phone (use the wall charger as it"s faster). 2. Download a decrypted device ROM or a Heimdall Firmware Package and extract everything to the one directory. 3. If the ROM is not a Heimdall Firmware Package it may instead be provided as multiple archives (nested or otherwise), extract them all to the same location. NOTE: If you want to use the CSC then extract it last. 4. Put your Galaxy S device into download mode and plug it in.. 5. Open a terminal and navigate to the directory where you extracted the ROM/firmware files. 6. Type the following to list all the functionality Heimdall supports: heimdall help 7. Before flashing, you must first know the names of the partitions you wish to flash. These can be obtained by executing: heimdall print-pit --no-reboot The inclusion of --no-reboot ensures the phone will not reboot after PIT file has been downloaded and displayed. After executing a command with the --no-reboot argument, the next command should include the --resume argument. NOTE: You can still safely reboot your phone manually (with the power button) after executing --no-reboot commands. 8. Use the help and print-pit output to construct a command with all the files you want to flash. Here is an example that does a full flash and repartition on a GT-I9000: heimdall flash --repartition --resume --pit s1_odin_20100512.pit --FACTORYFS factoryfs.rfs --CACHE cache.rfs --DBDATA dbdata.rfs --IBL+PBL boot.bin --SBL Sbl.bin --PARAM param.lfs --KERNEL zImage --MODEM modem.bin 9. Heimdall will display the progress as it flashes so that you know things are working as they should. 

Hvordan lage en Heimdall firmwarepakke:

Firstly, Heimdall"s firmware package format is just a regular TAR archive compressed with gzip. The only two real requirements are that a valid firmware.xml must be included (refer to Appendix A) and you can only include files (no directories, links etc.) As such if you"d like there is nothing preventing you from creating Heimdall packages manually. Of course Heimdall Frontend provides a simple user interface that takes care of all the hard work for you. There are two ways in which you can create a firmware package. You can create a package from scratch, or you can load an existing package, apply modifications and then save the package. Creating a package from scratch is the preferred approach, by taking this approach you"re far less likely to run into file name length limitations. Before you can access Heimdall Frontend"s firmware creation functionality (available from the "Create Package" tab) you must first specify which files will be included in your package, as well as a few flashing options i.e. Whether or not users should repartition when flashing. This information must be filled out from the "Flash" tab in exactly the same fashion you would provide information to flash your device (see "Performing a Custom Flash with Heimdall Frontend"). As mentioned above, it"s not the preferred means, but you"re able to load an existing package as a starting point for this information. Once you"ve specified the files/partitions you wish to include in your firmware package the "Create Package" tab will become available. Clicking this tab will display additional information that you can include in your package. In order to continue you must fill out all sections except for the URLs section, which is optional. The following is a break-down of what all these options mean. 

For Odin:

Avhengig av hvilken Odin-versjon du bruker det kan være litt annerledes. En nyere Odin-versjon er ganske enkel:

Forsikre deg om at oppstartslasteren din er oppdatert med enhetens fastvare eller oppdatert. Kontroller u# i firmware-zip / tar-navnet.

1) pakk ut .zip av den offisielle firmware.

2) Start Odin.

3) koble enheten din via USB. Når en enhet er koblet til, skal den vises i com-boksen.

4) velg AP, gå til utpakket fastvare innen valget og velg tar.md-filen eller tar-filen.

Forsikre deg om at du ikke velger / aktiverer noe med pit-alternativet.

5) Når du har lastet inn trykk startknappen og la den være slik.

Det skal ta litt tid eller komme opp i tjue minutter eller mer å starte. Når du er startet, bør du være god å gå med firmwaren.

Hvis du har mer enn bare en enkelt tar- eller tar.md5-fil, må du:

1) pakke ut .zip av den offisielle firmware.

2) zip kan inneholde en rekke ting (filer) som AP, BL, CP, CSC.

3) start Odin.

4) koble enheten via USB. Når den er tilkoblet, skal en enhet vise opp i com-boksen.

5) velg hver av de forskjellige boksene og legg de tilknyttede filene i riktig boks i valget. AP (system), BL (Bootloader), CP (modem), CSC (Device Varia nt).

Forsikre deg om at du ikke velger / aktiverer noe med pit-alternativet.

6) Trykk på startknappen når den er lastet inn, og la den være slik.

Kommentarer

• lenke til heimdall support thread forum.xda-developers.com/showthread.php?t=755265